Rain Tracker Model: RT-40A
Vehicle-Specific Installation Instructions

The instructions included with the product tell you how to install a Rain Tracker.  This page gives special vehicle-specific information.  Print this page using your browser's print function.

Application Vehicles
     These instructions apply to these vehicles, which all have similar wiper systems:

FORD ESCORT 82 - 90
FORD-TRUCK PICKUP F-150 82 - 91
FORD-TRUCK PICKUP F-250, F-350, F-450, F-550, SUPERDUTY 82 - 91
FORD-TRUCK BRONCO 82 - 91
FORD-TRUCK RANGER 83 - 94

Wiring Diagrams and Drawings:

Ford-Truck F150 with intermittent- Drawing applies to all application vehicles listed above. Print this.
Ford-Truck F150 no factory intermittent- Drawing applies to all application vehicles listed above. Print this.
RT-40A - HSS (Hot Side Switching)- Included with product, so print only if needed.
Troubleshooting procedure- Print out if needed.

Wire colors used in this vehicle:

+12V - BLK/LT-GRN
GROUND - CHASSIS
FAST - DK-BLU/ORN
SLOW - WHT

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker.  Use the factory drawing as a reference
to help you find the wires. Some models and years may vary slightly in wire colors.
Factory drawings can be wrong, so, confirm wire colors with a multimeter.

All wiper system wires, except ground, are available at the wiper switch. They
can usually be accessed by removing one or two access panels (Kick Panels) and,
possibly, the shrouds surrounding the steering column.

FIND CHASSIS GROUND
Find a suitable screw or bolt on the metal chassis of the vehicle to use as the
Rain Tracker ground. Scrape away paint as needed for a good connection.
Use a multi-meter to verify that the ground connection is at most a few ohms.
The cigarette lighter can also be a good alternate for ground and/or power.

For non-intermittent vehicles, trace the wires from the switch.
For vehicles with factor intermittent, trace the wires from the intermittent wiper
relay module(interval governor).

The RT-40A does not utilize the FAST windings of the wiper motor. Please disregard any references
to FAST that appear in these instructions.

Hydreon Corporation makes rain sensing windshield wipers that may be retrofitted to most cars, light trucks, SUV's, and specialty vehicles.  Rain Trackers are available for chassis builder applications, such as RV's or conversion vans.  This page generated by vehicle data file name: ford_truck_f-150_82-91.veh

Copyright 2008 Hydreon Corporation All rights reserved.