Rain Tracker Model: RT-50
Vehicle-Specific Installation Instructions

The instructions included with the product tell you how to install a Rain Tracker.  This page gives special vehicle-specific information.  Print this page using your browser's print function.

Application Vehicles
     These instructions apply to these vehicles, which all have similar wiper systems:

CHRYSLER FIFTH AVENUE 82 - 89
CHRYSLER LEBARON 82 - 95
CHRYSLER NEW YORKER 82 - 89
CHRYSLER PT CRUISER 01 - 05
PLYMOUTH NEON 95 - 01
DODGE NEON 95 - 05
DODGE SRT-4 03 - 05

Wiring Diagrams and Drawings:

2004 Chrysler Truck PT Cruiser- Drawing applies to all application vehicles listed above. Print this.
RT-50 - HSS (Hot Side Switching)- Included with product, so print only if needed.
Troubleshooting procedure- Print out if needed.

Wire colors used in this vehicle:

+12V - DK-BLU
GROUND - BLK or BLK/ORN*
FAST - RED/YEL or RED**
SLOW - BRN/WHT or BRN**

Special Rain Tracker Installation Notes for this vehicle:

Write the wire colors of the vehicle on the HSS drawing, and follow that
when you wire up the Rain Tracker.  Use the factory drawing as a reference
to help you find the wires. Some models and years may vary slightly in wire colors.
Factory drawings can be wrong, so, confirm wire colors with a multimeter.

All wiper system wires are available at the wiper switch.  They can usually be accessed
by removing one or two access panels (Kick Panels) and, possibly, the shrouds surrounding the
steering column.

Ground wire may be BLK/LT-GRN, check with meter if possible.

*All Lebaron and Fifth Avenue

** Early Lebaron (Years 1985 - 1990)

Hydreon Corporation provides vehicle-specific installation information for over 5000 differen models of cars, vans, SUV's, and light trucks.  This page generated by vehicle data file name: chrysler_pt_cruiser+.veh

Copyright 2008 Hydreon Corporation All rights reserved.